EWRF e7086TM3 5.8G 48CH 25mW/200mW/600mW Switchable FPV Transmitter Support OSD Configuring
Unfortunately This Product Is Sold Out
We recommend the following items:
- Buyer protection|Learn More >>
- 30 Day Returns Guarantee
- Full or partial refund if the item is not as described
- Full refund for damaged items
Size : 32.5x22.6x7.25mm
Working Voltage : DC6-24V
Working Current : 130mA(25mW)/230mA(200mW)/280mA(600mW)/12V
Working Frequency : 5.8G
Working Channel : 48CH
Transmit Power : 25mW/200mW/600mW/Turn OFF adjustable
Transmit Distance : 200m(25mW)/1.5km(200mW)/5km(600mW), in open area with 4-leaf clover antenna
Support parameter adjusted by Betaflight,fligth controller,OSD
25mW/200mW/600mW and Turn-off (PITMODE) switchable
5V BEC output, support power for receiver and camera
0 percent inteference when power on and swtich channel, definitely won't intefere others
With overheating auto protection, to prevent damge
With protective function that will not damage when forget to connect the antenna.
Support OSD configuring channel, power level and PITMODE mode switch
Support PMW channel switch and PITMODE switch
Can save the power setting
Can lead out buttons to adjust the parameter out of the module
Mini Nixie tube displayer
Power on, power setting is same as last time you used.
Long press Power Button, switch among 25mW,200mW and 600mW circularly
Short press Power Button twice, turn on or turn off transmitting. TX indicator on is tranmitting, off is turon off(regardless of the other 2 LED)
25mW works : TX on; 200mW works : TX 200mW 2 indicators on; 600mW works : 3 indicators all on
Channel Switch :
Long press Channel Botton, switch among A-B-C-D-E-F circularly, short press to switch CH1-CH8 circularly
When connect PMW, there is signal in 3 seconds, the decimal point on displayer is lighting, you can use the remote control transmitter to configure 1-8 channels and turn off the transmitter; Otherwise, it will enter the button configuring mode aftger 3 seconds, the decimal points won't show up.
Can lead out the configuring button for setting, there is bonding pad for button on module.
Had better connect the antenna before you power on it, can pretect the module.
2. 5V voltage input, the max current is 1A.
If item DOA(Dead of Arrival),Buyers Can return it in 14 Days,We will Replace it with New item after we receive DOA item.Please Contact us Before you sent the item back
All item Comes with Basic 3 Month Sellers Warranty,if item defective in 3 Month,We will offer replacement withour extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month,Buyers can still send it back,We will contact suppliers or Manufactory for Warranty.Buyers Might Need pay the Shipping fee For resend the replaced item.
Package weight: 0.0170 kg
Product size (L x W x H): 3.25 x 2.26 x 7.25 cm / 1.28 x 0.89 x 2.85 inches
Package size (L x W x H): 11.50 x 9.00 x 1.20 cm / 4.53 x 3.54 x 0.47 inches
- Receiving time = Processing time + Shipping time
- Flat Rate Shipping: 10-25 bussiness days
- Priority Direct Mail: 7-15 bussiness days
- Standard Shipping: 7-10 bussiness days
- Expedited Shipping: 3-7 bussiness days
Our Guarantee: 30 Day Returns or Exchange guarantee from the delivered date.
CUSTOMERS ALSO VIEWED
There are no questions yet.